MCI730 – rescue mode found + self compiled kernel failed to load

I found that device has a “rescue” mode. To enable it you need to power off device completely, press “Eject” button, plug power cord to socket and wait. It will start USB update procedure. I think it was done to rescue devices if update fail for some reason. This mode using kernel and file-system from different partitions, so it works without primary kernel. Using this mode it flashed mtd5 partition with custom kernel. I just added some debugging support to the i2c driver. Unfortunately kernel was not able to load for unknown reasons. Good news is that i was able to debrick device using rescue mode (i did backup of the original kernel).

So probably i will stop my kernel hacking efforts until getting serial connection. May be i will also try to recompile kernel w/o any modifications to check if it works.
Update: i was able go load self-compiled kernel. but it does not work as expected now

Advertisements
Tagged , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: